Cisco AIR-ANT2544V4M-R - Antenna Radiation Patterns

457
Cisco Vandal Resistant Omni-directional Dome Antenna for 860-928 MHz ISM, WPAN and LoRaWAN (ANT-UN-MP-OUT-QMA)
Figure 5 McMaster Carr Stud Driven Hole Punch
Table 4 Tool Details
Antenna Radiation Patterns
The following sequence of illustrations show the different antenna radiation patterns.
Note: The pattern plots that follow show measurements for two different samples of the antenna, labeled S1 (Sample 1) and
S2 (Sample 2).
Punching Action Stud Driven
Shape Double-D Shape
Hole Length 0.76"
Hole Width 0.91
Maximum Steel Thickness 1/16"
Tool Material Steel
For Use On Aluminum, Brass, Copper, Steel
Pilot Hole Required Yes
Kit Includes Punch, Die, Stud, Nut
Individual/Set Individual
Related Products Hydraulic Driver Stud Adapter 3449A172
11-Ton Straight Hydraulic Driver 3448A1
8-Ton Straight Hydraulic Driver 3484A15
8-Ton Right-Angle Hydraulic Driver 3490A21