99
Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide (4G-LTE-ANTM-O-3-B)
Figure 1 4G-LTE-ANTM-O-3 Antenna
Parts List
The shipment of your antenna includes the following items:
One Antenna Unit
Two SMA-Female to TNC-Male Adapters
Installation Guide
Features of the 4G-LTE-ANTM-O-3-B Antenna
The 4G-LTE-ANTM-O-3-B antenna supports the following features:
No tune, multiband coverage, dual 4G LTE, and GPS L1 frequencies.
Metal 5/8-inch stud mount with serrated face nut provides single cable exit for easier installation or antenna replacement.
Attractive low-profile housing for added overhead clearance.
IP67-compliant design provides maximum protection against water or dust under severe environmental conditions.
High-performance, low-loss cable, and high-quality connectors for maximum Radio Frequency (RF) system efficiency.
UV-resistant red, blue, black, or white radome.
Technical Specifications
Table 1 lists the specifications for the RF antenna.
To Next Page
Loading...
