51
Cisco RF Cables and Accessories
Accessories
Table 10 Cisco Lightning Arrestors
Table 11 Cisco Coaxial Adapters
Cisco PID Connectors Type Arrestor Type and Frequency Range (MHz)
CGR-LA-NM-NF N(m)-STR to N(f)-STR DC to 6000 MHz
GDT type
Supports active GNSS antennas, passes DC
ACC-LA-H-NM-NF N(m)-STR to N(f)-STR 698 to 2700 MHz
High power, ultra low shunt impedance, HPF
type
Does not pass DC, no support for active GNSS
antennas
CGR-LA-NF-NF N(f)-STR to N(f)-STR DC to 6000 MHz
GDT type
Supports active GNSS antennas, passes DC
AIR-ACC245LA-R RPTNC(jack)-STR to RPTNC(jack)-STR DC to 6000 MHz
GDT type
Passes DC, but the RPTNC connectors are not
commonly used with GNSS.
4G-ACC-OUT-LA TNC(f)-STR to TNC(m)-STR 698 to 2700 MHz
HPF type, medium power
Does not pass DC, no support for active GNSS
ACC-LA-G-TM-TF TNC(f)-STR to TNC(m)-STR DC to 6000 MHz
GDT type
Supports active GNSS antennas, passes DC
ACC-LA-G-TF-TF TNC(f)-STR to TNC(f)-STR DC to 6000 MHz
GDT type
Supports active GNSS antennas, passes DC
Cisco PID Connectors Type
AIR-ACC370-NM-RF N(m)-STR to RPTNC(jack)-STR
AIR-ACC370-NF-NF N(f)-STR to N(f)-STR
ANT-ADPTR-Q-TNC QMA(m)-STR to TNC(f)-STR
LTE-ADPT-SM-TF SMA(m)-STR to TNC(f)-STR