Cisco AIR-ANT2544V4M-R Guide

28
Cisco Systems, Inc. www.cisco.com
Antenna Selection Table
This section is designed to provide detailed information for each antenna that can be used for Cisco Industrial Routers and
Industrial Wireless Access Points. This document also contains selection tables for the Cisco antennas and accessories, as well
as basic compatibility information with Cisco Industrial Routers and Access Points Cisco antennas and accessories, as well as
installation scenarios, and technical specifications and diagrams of the available antennas. Read all of the safety precautions
before you begin installation.
The Antennas section is in three parts:
 Currently Supported Antennas
These are the antennas that are currently fully supported for deployments.
 Planned EOS Antennas
These are the antennas that are planned to reach their End Of Service. They are not recommended for new deployments.
 EOS Antennas
These are antennas that have reached their End Of Service.
The following tables list the currently supported antennas, planned EOS, and EOS antennas for Cisco Industrial Routers and
Industrial Wireless Access Points.
Currently Supported Antennas
All of the currently supported antennas are broken down by functional groups. They are:
 Cellular 2G/3G/4G Antennas
 GPS/GNSS Antennas
 WPAN, ISM, and LoRaWan Antennas
 Wi-Fi Antennas
— Single Band 2.4 GHz Antennas
— Single Band 5 GHz Antennas
— Dual Band 2.4 GHz + 5 GHz Antennas
Note: In all cases throughout this guide, Indoor Enterprise products are not listed.

Cisco AIR-ANT2544V4M-R Specifications

General

Brand	Cisco
Model	AIR-ANT2544V4M-R
Category	Antenna
Language	English