292
Cisco Systems, Inc. www.cisco.com
Cisco Cellular and GPS 3-in-1 Vehicle
Mount and Fixed Infrastructure Antenna
(ANT-3-4G2G1-O)
This chapter describes the technical specifications and installation instructions for the Cisco Cellular 3-in-1 Vehicle Mount and
Fixed Infrastructure Antenna, hereafter referred to as the antenna. The antenna is a three port antenna with two elements
designed to cover the 698-960, 1448-1511 and 1710-2700 MHz cellular bands and one GPS element. The antenna can be
mounted on the roof of a vehicle or fixed structure. The antenna meets or exceeds a variety of environmental ruggedization
specifications for transportation applications.
CAUTION: Read the information in Safety Precautions before installing or replacing antennas.
The topics included are:
Antenna Overview
Technical Specifications
Installing the Antenna
Obtaining Documentation and Submitting a Service Request
Antenna Overview
Antenna Features
Antenna Model
Antenna Assembly
Antenna Features
The antenna features:
Three antenna elements within one radome: two cellular and one GPS
Outdoor and transportation ready
Roof mount installation
Dual cellular elements supporting 698-960, 1448-1511 and 1710-2700 MHz
— Omnidirectional, vertically polarized, MIMO
— Integrated 2 foot cables with TNC male connectors
— LTE elements are interchangeable, either one can be connected to Main or Aux
Active GPS antenna has integrated 17 foot cable with SMA male connector
To Next Page
Loading...
