EasyManua.ls Logo

Cisco AIR-ANT2544V4M-R - Single Band 2.4 Ghz Antennas

Cisco AIR-ANT2544V4M-R
535 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Antenna Selection Table
Single Band 2.4 GHz Antennas
Single Band 5 GHz Antennas
Part Number / Description RF Connectors Antenna Frequency
Band Support and
Gain
Industrial Products Where
Supported
Cisco Aironet 2.4 GHz 13-dBi Directional Antenna
(AIR-ANT2413P2M-N).
2-Element Patch Array designed for outdoor use
with Cisco Industrial Wireless Access Points.
Type N Male WiFi 2.4 Ghz
13 dBi
IW3702 in FlexPort mode only
IW3702 use case requires
N-type cables.
Supported on the IR829GW
family, not recommended for
the IR829-2LTE as the antenna
is single band.
IR829 use case requires cables
and adapters.
IW-6300, ESW-6300
IW/ESW-6300 must be
configured in single band
mode. Requires N-type cables.
Cisco Aironet Omnidirectional Antennas
AIR-ANT2450V-N, AIR-ANT2450VG-N,
AIR-ANT2450V-N-HZ, and AIR-ANT2450HG-N.
Omnidirectional antennas designed for outdoor
use with Cisco Aironet Outdoor Access Points.
Type N Male WiFi 2.4 GHz
5 dBi
Cisco Aironet 1552H, 1552S,
1552WU, IW-6300,
ESW-6300.
IW/ESW-6300 must be
configured in single band
mode.
Cisco Aironet 8-dBi Omnidirectional Antenna
(AIR-ANT5180V-N).
Omnidirectional antenna designed for outdoor use.
Type N Male WiFi 2.4 GHz
8 dBi
IW-6300, ESW-6300
IW/ESW-6300 must be
configured in single band
mode.

Table of Contents

Other manuals for Cisco AIR-ANT2544V4M-R

Related product manuals