Cisco AIR-ANT2544V4M-R - Mounting on a Vertical Surface

180
Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R)
Mounting on a Vertical Surface
Follow these steps to mount your antenna on a vertical surface.
1. Attach the antenna bracket to the antenna using the jam nut provided (Figure 1).
Figure 1 Antenna Bracket
2. With the screen mesh washer between the two brackets, attach the antenna bracket to the mounting bracket using the
spherical washer and wing bolt provided (Figure 2).