365
Cisco Multiband Panel Outdoor 4G MIMO Antenna (ANT-4G-PNL-OUT-N)
Power Specifications
Installing the Antenna
The antenna installation includes the following procedures:
Contents of the Antenna Kit
Safety Warnings
Safety Precautions
Tools and Equipment Required
Preparing the Antenna for Installation
Mounting the Antenna
Connecting the Lightning Arrestor
Connecting the Antenna to the Router
Contents of the Antenna Kit
The antenna kit contains:
1 x Cisco ANT-4G-PNL-OUT-N antenna
1 x mounting bracket
Safety Warnings
WARNING: Avoid using or servicing any equipment that has outdoor connections during an electrical storm.
There may be a risk of electric shock from lightning. Statement 1088
WARNING: Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Statement 1001
Wind rating 160 km/hr (93 mph)
IP rating IP55
Radome Polycarbonate, UV resistant, white
Material substance compliance ROHS compliant
Table 3 Power Specifications for the Cisco ANT-4G-PNL-OUT-N Antenna
Specification Description
Maximum Voltage 2.0:1
Nominal Impedance 50 ohms
Maximum input power per port 10 watts
Table 2 Mechanical Specifications for the Cisco ANT-4G-PNL-OUT-N Antenna (continued)
Specification Description
To Next Page
Loading...
