Cisco AIR-ANT2544V4M-R Guide

229
Cisco Aironet 2.4-GHz/5-GHz 8-dBi Directional Antenna (AIR-ANT2588P3M-N)
Installing the Antenna
Installing the Antenna
You can install the antenna on a pole from 1.63" to 2.3" pipe O.D. The mounting options allow the antenna to be vertically
or horizontally polarized.
Tools and Equipment Required
 Antenna mount bracket
 Elevation adjustable bracket
 Azimuth adjustable bracket
 Two 1/4 in. 20 azimuth and elevation adjustment bolts and nuts with 1/4 in. flat washers and lock washers
 Two pipe clamps
The following tools and equipment are not provided:
 5/16 in wrench
 1/4 in flat head screwdriver
 5/16 in nut driver or flat head screwdriver for pipe clamps
Mounting on a Pole
To mount your antenna on a pole:
1. Remove antenna and mount kit from packaging.
2. Attach antenna mount bracket to the back of the antenna as shown applying a maximum nut-tightening torque of 12
in lbf (1.1 Nm).

Cisco AIR-ANT2544V4M-R Specifications

General

Brand	Cisco
Model	AIR-ANT2544V4M-R
Category	Antenna
Language	English