381
Cisco 5-in-1 Vehicle Mount and Fixed Infrastructure Antenna (ANT-5-4G2WL2G1-O)
Radio Frequency Specifications
Table 1 Cellular Antenna Radio Frequency Specification
Specification Description
Antenna type Dual element, omnidirectional, 2x2 MIMO
Frequency 698 to 960 MHz
1448 to1511 MHz
1710 to 2700 MHz
Nominal impedance 50 ohms
VSWR 2.1:1 maximum at 698 to 960 MHz
2.4:1 maximum at 1448 MHz edge, 2.2:1
typical at 1448-1511 MHz
2.0:1 maximum at 1710 to 2700 MHz
Gain The gain values (dBi) for each frequency range
are:
2.4 dBi typical, 2.9 dBi maximum at 698 to
960 MHz
4.2 dBI typical, 4.8 dBI maximum at
1448-1511 MHz
4.9 dBi typical, 6.5 dBi maximum at 1710 to
2700 MHz
Isolation, cellular to cellular (Main to Aux) 14 dB minimum-698 to 960 MHz
20 dB minimum-1448-1511 MHz
20 dB minimum-1710 to 2700 MHz
Isolation, WLAN to cellular 25 dB minimum-698 to 960 MHz
20 dB minimum-1448 to 1511 MHz
15 dB minimum-1710 to 2700 MHz
Efficiency Antennas were designed and tested for high RF
efficiency in all supported cellular bands. Detailed
technical specifications can be obtained through
your Cisco authorized partner or Cisco account
representative.
Polarization Linear, Vertical
Radiation Pattern Omnidirectional
To Next Page
Loading...
