Cisco AIR-ANT2544V4M-R - Page 533

533
Outdoor Panel Antenna for WiMAX 1.8, 2.5, and 3.8 GHz
6. Adjust to the desired azimuth and elevation angles. Tighten all nuts and bolts to a torque rating of 55 in-lbf.
7. Attach the lightning arrestor to the router.
8. Attach the two RF cables to the antenna by connecting the ends of the LMR-400 (male) cables to the two receptacles on
the rear of the antenna panel.
1 1/4”-20x3/4 carriage bolt 2 1/4”-20 spring lock washer
3 1/4”-20 flat washer 4 Elevation adjustable bracket
5 Elevation adjustable bracket 6 1/4”-20 hex nut
300679
1
2
3
4
5
6