Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

• Use the never keyword to specify that the secondary pseudowire does not fall back to the primary pseudowire if

the primary pseudowire becomes available again, unless the secondary pseudowire fails.

Step 5 exit

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# exit

RP/0/RSP0/CPU0:router(config-l2vpn)#

Exits the current configuration mode.

Step 6 xconnect group group-name

Example:

RP/0/RSP0/CPU0:router(config-l2vpn)# xconnect group A

RP/0/RSP0/CPU0:router(config-l2vpn-xc)#

Enters the name of the cross-connect group.

Step 7 p2p { xconnect-name }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p xc1

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)#

Enters a name for the point-to-point cross-connect.

Step 8 neighbor { A.B.C.D } { pw-id value }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)# neighbor 10.1.1.2 pw-id 2

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p-pw)#

Configures the pseudowire segment for the cross-connect.

Step 9 pw-class { class-name }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p-pw)# pw-class path1

Configures the pseudowire class name.

Step 10 backup { neighbor A.B.C.D } { pw-id value }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p-pw)# backup neighbor 10.2.2.2 pw-id 5

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p-pw-backup)#

Configures the backup pseudowire for the cross-connect.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

124

Implementing Point to Point Layer 2 Services

Configuring Point-to-Point Pseudowire Redundancy

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series