Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Step 8 interface type interface-path-id.subinterface

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# interface GigabitEthernet 0/0/0/0.10

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)#

Enters interface configuration mode and adds an interface to a bridge domain that allows packets to be forwarded and

received from other interfaces that are part of the same bridge domain.

Step 9 ethernet ring g8032 ring-name

Example:

RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 r1

Enables G.8032 ring mode, and enters G.8032 configuration submode.

Step 10 instance number

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-erp)# instance 1

Enters the Ethernet ring G.8032 instance configuration submode.

Step 11 description string

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)# description test

Specifies a string that serves as description for that instance.

Step 12 profile profile-name

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)#profile p1

Specifies associated Ethernet ring G.8032 profile.

Step 13 rpl { port0 | port1 } { owner | neighbor | next-neighbor }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)#rpl port0 neighbor

Specifies one ring port on local node as RPL owner, neighbor or next-neighbor.

Step 14 inclusion-list vlan-ids vlan-id

Example:

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

282

Implementing Multipoint Layer 2 Services

Configuring an ERP Instance

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series