Cisco ASR 9000 Series

SUMMARY STEPS
1. configure
2. l2vpn
3. pw-class { name }
4. encapsulation mpls
5. load-balancing flow-label { both | code | receive | transmit } [ static ]
6. exit
7. exit
8. xconnect group group-name
9. p2p xconnect-name
10. interface type interface-path-id
11. neighbor A.B.C.D pw-id pseudowire-id
12. pw-class class-name
13. Use the commit or end command.
DETAILED STEPS
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2 l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3 pw-class { name }
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class path1
Configures the pseudowire class template name to use for the pseudowire.
Step 4 encapsulation mpls
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
Configures the pseudowire encapsulation to MPLS.
Step 5 load-balancing flow-label { both | code | receive | transmit } [ static ]
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
287
Implementing Multipoint Layer 2 Services
Enabling Load Balancing with ECMP and FAT PW for VPWS