Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Repeat steps 11 to 13 for each MSTI.

Note

Step 14 interface { Bundle-Ether | GigabitEthernet | TenGigE | FastEthernet } instance

Example:

RP/0/RSP0/CPU0:router(config-mstp)# interface FastEthernet 0/0/0/1

RP/0/RSP0/CPU0:router(config-mstp-if)#

Enters the MSTP interface configuration submode, and enables STP for the specified port.

Forward interface in Rack/Slot/Instance/Port format.

Step 15 instance id port-priority priority

Example:

RP/0/RSP0/CPU0:router(config-mstp-if)# instance 101 port-priority 160

Sets the port priority performance parameter for the MSTI.

Allowed values for the MSTI ID are from 0 through 4094.

Allowed values for port priority are from 0 through 240 in multiples of 16.

Step 16 instance id cost cost

Example:

RP/0/RSP0/CPU0:router(config-mstp-if)# instance 101 cost 10000

Sets the internal path cost for a given instance on the current port.

Allowed values for the MSTI ID are from 0 through 4094.

Allowed values for port cost are from 1 through 200000000.

Repeat steps 15 and 16 for each MSTI for each interface.

Step 17 external-cost cost

Example:

RP/0/RSP0/CPU0:router(config-mstp-if)# external-cost 10000

Sets the external path cost on the current port.

Allowed values for port cost are from 1 through 200000000.

Step 18 link-type { point-to-point | multipoint }

Example:

RP/0/RSP0/CPU0:router(config-mstp-if)# link-type point-to-point

Sets the link type of the port to point-to-point or multipoint.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

430

Implementing Multiple Spanning Tree Protocol

Configuring MSTP parameters

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series