RP/0/RSP0/CPU0:router(config-mstp)# max hops 30
Sets the maximum age and maximum hops performance parameters for the bridge.
Allowed values for maximum age time for the bridge in seconds are from 6 through 40.
Allowed values for maximum number of hops for the bridge in seconds are from 6 through 40.
Step 9 transmit hold-count count
Example:
RP/0/RSP0/CPU0:router(config-mstp)# transmit hold-count 8
Sets the transmit hold count performance parameter.
Allowed values are from 1 through 10.
Step 10 provider-bridge
Example:
RP/0/RSP0/CPU0:router(config-mstp)# provider-bridge
Places the current instance of the protocol in 802.1ad mode.
Step 11 instance id
Example:
RP/0/RSP0/CPU0:router(config-mstp)# instance 101
RP/0/RSP0/CPU0:router(config-mstp-inst)#
Enters the MSTI configuration submode.
Allowed values for the MSTI ID are from 0 through 4094.
Step 12 priority priority
Example:
RP/0/RSP0/CPU0:router(config-mstp-inst)# priority 8192
Sets the bridge priority for the current MSTI.
Allowed values are from 0 through 61440 in multiples of 4096.
Step 13 vlan-id vlan-range [,vlan-range ][,vlan-range ] [,vlan-range ]
Example:
RP/0/RSP0/CPU0:router(config-mstp-inst)# vlan-id 2-1005
Associates a set of VLAN IDs with the current MSTI.
List of VLAN ranges in the form a-b, c, d, e-f, g, and so on.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
429
Implementing Multiple Spanning Tree Protocol
Configuring MSTP parameters
To Next Page
Loading...
Need help?
General
