Cisco ASR 9000 Series

NLRI Format: Route-type 1:
[Type][Len][RD][ESI][ETag][MPLS Label]
Net attributes: [Type][RD][ESI][ETag]
Path attributes: [MPLS Label]
Example
route-policy evpn-policy
if rd in (1.1.1.1:0) [and/or evpn-route-type is 1] [and/or esi in (0a1.a2a3.a4a5.a6a7.a8a9)]
[and/or etag is 4294967295] then
set ..
endif
end-policy
!
route-policy evpn-policy
if rd in (1.1.1.2:0) [and/or evpn-route-type is 1] [and/or esi in
(00a1.a2a3.a4a5.a6a7.a8a9)] [and/or etag is 4294967295] then
set ..
endif
end-policy
Route Type 2: MAC/IP Advertisement Route
The host's IP and MAC addresses are advertised to the peers within NLRI. The control plane learning of MAC
addresses reduces unknown unicast flooding.
A MAC/IP Advertisement Route type specific EVPN NLRI consists of the following fields:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
568
EVPN Features
EVPN Route Types