PurposeCommand or Action
Displays the contents of the backup file.
show license backup backup-file
Example:
Step 3
RP/0/RSP0/CPU0:router(admin)# show license backup
disk1:/license_back
Examples
The following example shows sample output from the show license backup command.
RP/0/RSP0/CPU0:router(admin)# show license backup disk1:/license_back
Local Chassis UDI Information:
S/N : TBA09370035
Operation ID: 5
Licenses :
FeatureID Type #installed
CRS-MSC-40G Slot based, Permanent 2
XC-L3VPN Slot based, Permanent 1
RP/0/RSP0/CPU0:router(admin)# show license backup disk0:/lic_backup.pkg
Tue Jul 27 17:12:44.982 pst
Local Chassis UDI Information:
S/N : FOX1316G5TL
Operation ID: 9
FeatureID: A9K-ADV-OPTIC-LIC (Slot based, Permanent)
Total licenses 1
Pool: Owner 1
Allocated Node(s):
0/0/CPU0 1 [Owner]
FeatureID: A9K-ADV-VIDEO-LIC (Slot based, Evaluation)
Total licenses 1
Pool: Owner 1
Allocated Node(s):
0/RSP0/CPU0 1 [Owner]
FeatureID: A9K-iVRF-LIC (Slot based, Permanent)
Total licenses 1
Pool: Owner 1
FeatureID: A9K-iVRF-LIC (Slot based, Evaluation)
Total licenses 3
Pool: Owner 3
Allocated Node(s):
0/1/CPU0 1 [Owner]
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
91
Software Entitlement
Configure Licenses Using Default Licensing