Cisco ASR 9000 Series

Related Topics
Configuring a PTP Slave Interface, on page 241
Configuring PTP Clock Settings for the Telecom Profile
Perform this task to configure clock settings to be consistent with ITU-T Telecom Profiles for Frequency.
SUMMARY STEPS
1.
configure
2.
ptp
3.
clock
4.
domain
5.
timescale
6.
time-source source
7.
exit
8.
clock-selection telecom-profile
9.
clock-advertisement telecom-profile
10.
Use one of these commands:
•
end
•
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters PTP configuration mode.ptp
Example:
RP/0/RSP0/CPU0:router(config)# ptp
RP/0/RSP0/CPU0:router(config-ptp)#
Step 2
Enters PTP clock configuration mode.clock
Example:
RP/0/RSP0/CPU0:router(config-ptp)# clock
RP/0/RSP0/CPU0:router(config-ptp-clock)#
Step 3
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
255
Configuring PTP
Configuring PTP Clock Settings for the Telecom Profile