Cisco ASR 9000 Series User Manual

DETAILED STEPS
PurposeCommand or Action
configure
Step 1
(Optional)
Sets the system contact string.
snmp-server contact system-contact-string
Example:
RP/0/RSP0/CPU0:router(config)# snmp-server contact
Dial System Operator at beeper # 27345
Step 2
(Optional)
Sets the system location string.
snmp-server location system-location
Example:
RP/0/RSP0/CPU0:router(config)# snmp-server location
Building 3/Room 214
Step 3
(Optional)
Sets the system serial number.
snmp-server chassis-id serial-number
Example:
RP/0/RSP0/CPU0:router(config)# snmp-server chassis-id
1234456
Step 4
commit
Step 5
Defining the Maximum SNMP Agent Packet Size
This task shows how to configure the largest SNMP packet size permitted when the SNMP server is receiving
a request or generating a reply.
The sequence in which you issue the snmp-server commands for this task does not matter.Note
SUMMARY STEPS
1.
configure
2.
(Optional) snmp-server packetsize byte-count
3.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
369
Implementing SNMP
Defining the Maximum SNMP Agent Packet Size

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English