Cisco ASR 9000 Series User Manual

PurposeCommand or Action
Enters the TLS configuration mode. Configures the
local and remote trustpoints.
tls trust-point local local-tp-name remote remote-tp-name
Example:
RP/0/RSP0/CPU0:router(config-openflow-switch)# tls
trust-point local tp1 remote tp2
Step 3
Adds the logical switch configuration for the
OpenFlow agent to the running configuration.
commit
Example:
RP/0/RSP0/CPU0:router(config-openflow-switch)#
commit
Step 4
Exits logical switch configuration mode and enters
EXEC mode.
end
Example:
RP/0/RSP0/CPU0:router(config-openflow-switch)# end
Step 5
Configuring NetFlow for the OpenFlow Agent
SUMMARY STEPS
1.
configure
2.
flow exporter-map fem-name
3.
destination location
4.
version v9
5.
commit
6.
exit
7.
flow monitor-map map-name
8.
record ipv4
9.
exporter map-name
10.
cache entries number
11.
cache timeout {active timeout-value | inactive timeout-value | update timeout-value}
12.
commit
13.
exit
14.
sampler-map map-name
15.
random 1 out-of sampling-interval
16.
commit
17.
exit
18.
commit
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
294
Implementing Open Flow Agent
Configuring NetFlow for the OpenFlow Agent

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model