Cisco ASR 9000 Series User Manual

Example: 1P Data Path configuration
This example shows the Data Path configuration details:
onep
transport tcp port 15001
datapath transport vpathudp sender-id 1
To check for the running service node:
show run int gigEth 0/0/0/0
service-policy type pbr input onep-pmap-1
service-node ONEP_1
destination-port 19999 ==> LOCAL_PORT from dpss.conf
encapsulation udp
source-port 6633
service-endpoint-ip 192.168.2.102 ==> LOCAL_IP from dpss.conf
my-sender-id 1
endpoint-sender-id 1
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
271
Implementing OnePK
Example: 1P Data Path configuration

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model