Configuration Examples for FPD Image Upgrade
The following examples indicates the use of commands associated with the FPD image upgrade procedure.
show hw-module fpd Command Output: Example
Use the show hw-module fpd to display the current version of FPD images on the SPAs, SIPs and other cards
installed on your router.
This command can be used to identify information about FPDs on any card. If you enter the location of a line
card that is not a SPA, the output displays information about any programmable devices on that line card.
The following example shows how to display FPD compatibility for all modules in the router:
RP/0/RSP1/CPU0:router# show hw-module fpd location all
Mon Jun 29 05:38:50.332 PST
===================================== ==========================================
Existing Field Programmable Devices
==========================================
HW Current SW Upg/
Location Card Type Version Type Subtype Inst Version Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP0/CPU0 A9K-RSP-4G 4.8 lc fpga3 0 1.13 No
lc fpga1 0 1.5 No
lc fpga2 0 1.14 No
lc cbc 0 1.2 No
lc fpga4 0 1.6 No
lc rommon 0 1.0 No
--------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 1 4.0 No
--------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 2 4.0 No
--------------------------------------------------------------------------------
0/1/CPU0 A9K-40GE-B 1.0 lc fpga1 0 0.38 No
lc fpga2 0 0.8 No
lc cbc 0 2.2 No
lc cpld1 0 0.15 No
lc rommon 0 1.0 No
--------------------------------------------------------------------------------
0/1/CPU0 A9K-40GE-B 1.0 lc fpga1 1 0.38 No
--------------------------------------------------------------------------------
0/4/CPU0 A9K-8T/4-B 1.0 lc fpga1 0 0.38 No
lc fpga2 0 0.10 No
lc cbc 0 2.2 No
lc cpld2 0 0.7 No
lc cpld1 0 0.15 No
lc cpld3 0 0.3 No
lc rommon 0 1.0 No
lc fpga3 0 14.42 No
--------------------------------------------------------------------------------
0/4/CPU0 A9K-8T/4-B 1.0 lc fpga1 1 0.38 No
--------------------------------------------------------------------------------
0/6/CPU0 A9K-4T-B 1.0 lc fpga1 0 0.38 No
lc fpga2 0 0.10 No
lc cbc 0 2.2 No
lc cpld2 0 0.7 No
lc cpld1 0 0.15 No
lc cpld3 0 0.3 No
lc rommon 0 1.0 No
lc fpga3 0 14.42 No
--------------------------------------------------------------------------------
0/6/CPU0 A9K-4T-B 1.0 lc fpga1 1 0.38 No
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
163
Upgrading FPD
Configuration Examples for FPD Image Upgrade