Cisco ASR 9000 Series

CHAPTER 17
Implementing Object Tracking
This module describes the configuration of object tracking on your Cisco IOS XR network. For complete
descriptions of the commands listed in this module, see Related Documents, on page 340. To locate
documentation for other commands that might appear in the course of performing a configuration task, search
online in Cisco ASR 9000 Series Aggregation Services Router Commands Master List.
Table 34: Feature History for Implementing Object Tracking
ModificationRelease
This feature was introduced.Release 4.0.0
The ability to create a tracked list based on a threshold percentage or weight was
added.
Release 4.2.1
This module contains the following topics:
•
Prerequisites for Implementing Object Tracking, page 329
•
Information About Object Tracking, page 330
•
How to Implement Object Tracking, page 330
•
Configuration Examples for Configuring Object Tracking, page 340
•
Additional References, page 340
Prerequisites for Implementing Object Tracking
You must be in a user group associated with a task group that includes the proper task IDs. The command
reference guides include the task IDs required for each command. If you suspect user group assignment is
preventing you from using a command, contact your AAA administrator for assistance.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
329