Cisco ASR 9000 Series User Manual

DescriptionVariable
Enter format filesystem: ? to see the available
options.
For more information, see Cisco ASR 9000 Series
Aggregation Services Router System Management
Command Reference.
options
In the following example, the format command is used to format the hard disk:
RP/0/RSP0/CPU0:router# format harddisk:
Removing and Replacing Cards
This section describes card replacement issues and procedures.
Removing Line Cards
Line cards are designed for online insertion and removal (OIR). A line card is a single card that contains all
service processing functions and physical line interfaces.
The OIR feature allows you to remove and replace cards without removing power to the card or chassis.
Removing a card interrupts all traffic passing through the card, but it does not remove the card configuration.
When you remove a card, the configuration remains for all interfaces, but the interfaces do not appear in the
output of the show interfaces command. You can view interface configurations by entering the show
running-config command. The following example shows how the configuration appears when a card is
removed:
RP/0/RSP0/CPU0:router# show running-config
Building configuration...
hostname router
router ospf 3269
area 0
interface POS0/3/0/0
cost 20
!
interface preconfigure POS0/3/0/0
ipv4 address 10.10.50.1 255.255.255.0
!
interface preconfigure POS0/3/0/1
description POS0/3/0/1
shutdown
!
interface preconfigure POS0/3/0/2
description POS0/3/0/2
shutdown
!
interface preconfigure POS0/3/0/3
description POS0/3/0/3
shutdown
!
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
124
Managing the Router Hardware
Removing and Replacing Cards

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English