Cisco ASR 9000 Series User Manual

In addition to the default vty pool and default fault manager pool, you can also configure a user-defined vty
pool that can reference the default template or a user-defined template.
When configuring vty pools, follow these guidelines:
•
The vty range for the default vty pool must start at vty 0 and must contain a minimum of five vtys.
•
The vty range from 0 through 99 can reference the default vty pool.
•
The vty range from 5 through 99 can reference a user-defined vty pool.
•
The vty range from 100 is reserved for the fault manager vty pool.
•
The vty range for fault manager vty pools must start at vty 100 and must contain a minimum of six vtys.
•
A vty can be a member of only one vty pool. A vty pool configuration will fail if the vty pool includes
a vty that is already in another pool.
•
If you attempt to remove an active vty from the active vty pool when configuring a vty pool, the
configuration for that vty pool will fail.
How to Implement Physical and Virtual Terminals on Cisco IOS
XR Software
Modifying Templates
This task explains how to modify the terminal attributes for the console and default line templates. The terminal
attributes that you set will modify the template settings for the specified template.
SUMMARY STEPS
1.
configure
2.
line {console | default}
3.
Configure the terminal attribute settings for the specified template using the commands in line template
configuration mode.
4.
Use one of the following commands:
•
end
•
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters line template configuration mode for the specified line template.line {console | default}
Step 2
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
346
Implementing Physical and Virtual Terminals
How to Implement Physical and Virtual Terminals on Cisco IOS XR Software

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English