Cisco ASR 9000 Series User Manual

Restoring Licenses
If your licenses become corrupted, and you have previously created a backup of your licenses, you can perform
this task to restore the licenses to your router.
Before You Begin
You must have created a backup file of your licenses before you can restore them on your router.
SUMMARY STEPS
1.
admin
2.
show license backup backup-file
3.
license restore backup-file
DETAILED STEPS
PurposeCommand or Action
Enters administration EXEC mode.admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 1
Displays the contents of the backup file. You should verify
the contents of the backup file before you restore your
licenses.
show license backup backup-file
Example:
RP/0/RSP0/CPU0:router(admin)# show license
backup disk1:/license_back
Step 2
Restores all licenses on the router from a backup file in the
specified location. This can be a local file, or a remote file
on a TFTP or RCP server.
license restore backup-file
Example:
RP/0/RSP0/CPU0:router(admin)# license restore
disk1:/license_back
Step 3
Examples
This example shows sample output from the license restore command.
RP/0/RSP0/CPU0:router(admin)# license restore disk1:/license_back
Info: This command will erase all existing licenses.
Info: It is strongly recommended to backup existing licenses first.
Do you wish to proceed? [yes/no]: y
License command "license restore disk1:/license_back" completed successfully.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
92
Software Entitlement
Configure Licenses Using Default Licensing

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English