Cisco ASR 9000 Series

Configuring Syslog Throttling
This task is used to enable or disable Call Home syslog message throttling and avoid sending repetitive Call
Home syslog messages.
SUMMARY STEPS
1.
configure
2.
call-home
3.
syslog-throttling
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters call home configuration submode.call-home
Example:
RP/0/RSP0/CPU0:router (config) # call-home
Step 2
Enables or disables Call Home syslog message throttling
and avoids sending repetitive Call Home syslog messages.
By default, syslog message throttling is enabled.
syslog-throttling
Example:
RP/0/RSP0/CPU0:router (config-call-home) #
syslog-throttling
Step 3
Enabling AAA Authorization
This task is used to enable AAA authorization for Call Home messages.
SUMMARY STEPS
1.
configure
2.
call-home
3.
aaa-authorization [ username username]
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
322
Configuring Call Home
Configuring Syslog Throttling