Cisco ASR 9000 Series User Manual

Chassis scoped: None
Router scoped : None
Uses time-of-day selection
S Input Last Selection Point Pri Time Status
== ======================== ======================== === ==== ===========
1 PTP [0/RSP0/CPU0] n/a 10 Yes Available
GigabitEthernet0/1/1/0 0/RSP0/CPU0 T0-SEL-B 1 10 No Available
Additional References
The following sections provide references related to implementing PTP on Cisco IOS XR software.
Related Documents
Document TitleRelated Topic
PTP Commands module of Cisco ASR 9000 Series
Aggregation Services Router System Management
Command Reference
Cisco IOS XR PTP commands
Frequency Synchronization Commands module of
Cisco ASR 9000 Series Aggregation Services Router
System Management Command Reference
Cisco IOS XR SyncE commands
Configuring Ethernet Interfaces module of
Cisco ASR 9000 Series Aggregation Services Router
Interface and Hardware Component Configuration
Guide
Cisco IOS XR SyncE configuration information
Cisco ASR 9000 Series Aggregation Services Router
Getting Started Guide
Information about getting started with Cisco IOS XR
Software
Cisco ASR 9000 Series Aggregation Services Router
Commands Master List
Cisco IOS XR master command index
Configuring AAA Services on the Cisco ASR 9000
Series Router module of Cisco ASR 9000 Series
Aggregation Services Router System Security
Configuration Guide
Information about user groups and task IDs
Standards
TitleStandards
—
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
259
Configuring PTP
Additional References

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English