Cisco ASR 9000 Series User Manual

Link Bundling Usage: Example
This example shows how to configure interface membership in a bundle link:
1
Configure the configuration groups:
RP/0/RSP0/CPU0:router# show running group bundle1
group bundle1
interface 'GigabitEthernet0/1/0/1[1-6]'
bundle id 1 mode active
!
end-group
RP/0/RSP0/CPU0:router# show running | inc apply-group
Building configuration...
apply-group isis l2tr isis2 mpp bundle1
2
Check the local configuration:
RP/0/RSP0/CPU0:router# show running interface gigabitEthernet 0/1/0/11
interface GigabitEthernet0/1/0/11
!
RP/0/RSP0/CPU0:router# show running interface Bundle-Ether1
interface Bundle-Ether1
ipv4 address 108.108.1.1 255.255.255.0
bundle maximum-active links 10
bundle minimum-active links 5
!
3
Check the inheritance configuration view:
RP/0/RSP0/CPU0:router# show running inheritance interface GigabitEthernet 0/1/0/11
interface GigabitEthernet0/1/0/11
## Inherited from group bundle1
bundle id 1 mode active
!
4
Check that the inheritance configuration took effect:
RP/0/RSP0/CPU0:router# show interface Bundle-Ether1
Bundle-Ether1 is up, line protocol is up
Interface state transitions: 1
Hardware is Aggregated Ethernet interface(s), address is 0024.f71f.4bc3
Internet address is 108.108.1.1/24
MTU 1514 bytes, BW 6000000 Kbit (Max: 6000000 Kbit)
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA,
Full-duplex, 6000Mb/s
loopback not set,
ARP type ARPA, ARP timeout 04:00:00
No. of members in this bundle: 6
GigabitEthernet0/1/0/11 Full-duplex 1000Mb/s Active
GigabitEthernet0/1/0/12 Full-duplex 1000Mb/s Active
GigabitEthernet0/1/0/13 Full-duplex 1000Mb/s Active
GigabitEthernet0/1/0/14 Full-duplex 1000Mb/s Active
GigabitEthernet0/1/0/15 Full-duplex 1000Mb/s Active
GigabitEthernet0/1/0/16 Full-duplex 1000Mb/s Active
Last input 00:00:00, output 00:00:00
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
154
Configuring Flexible Command Line Interface Configuration Groups
Link Bundling Usage: Example

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model