EasyManuals Logo
Home>Cisco>Network Router>ASR 9000 Series

Cisco ASR 9000 Series User Manual

Cisco ASR 9000 Series
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
Transferring Licenses to a new Route Switch Processor 440
To upgrade a route switch processor (RSP) to the RSP440 with your active licenses, perform this task.
SUMMARY STEPS
1.
Save the original license file that you received from Cisco, in a USB drive or TFTP server.
2.
save configuration running
3.
Replace the RSP with the RSP440.
4.
load
5.
Add all licenses as described in Adding a License for a New Feature, on page 88.
DETAILED STEPS
PurposeCommand or Action
Stores the license files in a location that is
accessible to the new RSP after it is installed.
Save the original license file that you received from Cisco, in a USB
drive or TFTP server.
Step 1
Saves the running-configuration from both global
configuration and administration configuration
save configuration running
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
modes to files. The administration configuration
contains user group information that is required for
the licenses.
RP/0/RSP0/CPU0:router(config)# save configuration running
tftp://192.10.10.10/mylicenses/rc_03132013
RP/0/RSP0/CPU0:router(config)# exit
RP/0/RSP0/CPU0:router# admin
RP/0/RSP0/CPU0:router(admin)# configure
RP/0/RSP0/CPU0:router(admin-config)# save configuration
running tftp://192.10.10.10/mylicenses/rc_admin_03132013
Replace the RSP with the RSP440.
Step 3
Loads the saved running-configuration files on the
new RSP440. This must be done in both global
load
Example:
RP/0/RSP0/CPU0:router# configure
Step 4
configuration mode and administration
configuration mode.
RP/0/RSP0/CPU0:router(config)# load
tftp://192.10.10.10/mylicenses/rc_03132013
RP/0/RSP0/CPU0:router(config)# exit
RP/0/RSP0/CPU0:router# admin
RP/0/RSP0/CPU0:router(admin)# configure
RP/0/RSP0/CPU0:router(admin-config)# load
tftp://192.10.10.10/mylicenses/rc_admin_03132013
Installs the licenses to the new RSP.Add all licenses as described in Adding a License for a New Feature,
on page 88.
Step 5
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
93
Software Entitlement
Configure Licenses Using Default Licensing

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 9000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals