Cisco ASR 9000 Series User Manual

PurposeCommand or Action
•
Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Tracking IPSLA Reachability
Use this task to enable the tracking of the return code of IP service level agreement (SLA) operations.
SUMMARY STEPS
1.
configure
2.
track track-name
3.
type rtr ipsla-no reachability
4.
commit
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 1
Enters track configuration mode.
track track-name
Example:
RP/0/RSP0/CPU0:router(config)# track t1
Step 2
Specifies the IP SLA operation ID to be tracked for
reachability. Values for the ipsla-no can range from1
to 2048.
type rtr ipsla-no reachability
Example:
RP/0/RSP0/CPU0:router(config-track)# type rtr 100
reachability
Step 3
commit
Step 4
Configuring IPSLA Tracking: Example
This example shows the configuration of IPSLA tracking:
RP/0/RSP0/CPU0:router(config)# track track1
RP/0/RSP0/CPU0:router(config-track)# type rtr 1 reachability
RP/0/RSP0/CPU0:router(config-track)# delay up 5
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
339
Implementing Object Tracking
Tracking IPSLA Reachability

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model