Cisco ASR 9000 Series User Manual

PurposeCommand or Action
Exits clock port parameter configuration mode.exit
Example:
RP/0/RSP0/CPU0:router(config-clk-parms)# exit
Step 5
Enters frequency synchronization mode for the clock
interface.
frequency synchronization
Example:
RP/0/RSP0/CPU0:router(config-clock-if)# frequency
synchronization
Step 6
Configures selection input for the clock interface.selection input
Example:
RP/0/RSP0/CPU0:router(config-clk-freqsync)#
selection input
Step 7
Configures priority for the clock interface.
priority number
Example:
RP/0/RSP0/CPU0:router(config-clk-freqsync)#
priority 10
Step 8
Configures the wait-to-restore time for the clock interface.
wait-to-restore number
Example:
RP/0/RSP0/CPU0:router(config-clk-freqsync)#
wait-to-restore 0
Step 9
Disables SSM packets for the clock interface.ssm disable
Example:
RP/0/RSP0/CPU0:router(config-clk-freqsync)# ssm
disable
Step 10
Configures ITU-T quality parameters.
quality receive exact itu-t option option generation
number
Step 11
Example:
RP/0/RSP0/CPU0:router(config-clk-freqsync)#
quality receive
exact itu-t option 2 generation 2 PRS
Saves configuration changes.Use one of these commands:
Step 12
•
end
•
When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them
•
commit
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
249
Configuring PTP
Configuring GPS Settings for the Grand Master Clock

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English