EasyManuals Logo
Home>Cisco>Network Router>ASR 9000 Series

Cisco ASR 9000 Series User Manual

Cisco ASR 9000 Series
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
•
Verify that the new package is supported on your system. Some software packages require that other
packages or package versions be activated, and some packages only support specific cards.
•
Review the release notes for important information related to that release and to help determine the
package compatibility with your router configuration.
•
Verify that the system is stable and prepared for the software changes.
SUMMARY STEPS
1.
admin
2.
show diag
3.
Update the ROMMON software if necessary.
4.
show install active
5.
show install pie-info device:package [ brief | detail | verbose ]
6.
verify packages
7.
exit
8.
(Optional) show system verify start
9.
(Optional) show system verify [ detail | report ]
10.
show clock
DETAILED STEPS
PurposeCommand or Action
Enters administration EXEC mode.admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 1
Displays the ROMMON software version for all cards in the system. Verify that
the correct ROMMON software version is installed before upgrading a
Cisco IOS XR software package.
show diag
Example:
RP/0/RSP0/CPU0:router(admin)#
show diag
Step 2
See Related Topics for information regarding the required ROM Monitor
(ROMMON) software version.
Note
Updates the ROMMON software. For instructions, see Cisco ASR 9000 Series
Aggregation Services Router ROM Monitor Guide.
Update the ROMMON software if
necessary.
Step 3
Displays the active software on the router for the owner SDR. Use this command
to determine what software should be added, upgraded or downgraded on the
show install active
Example:
RP/0/RSP0/CPU0:router(admin)#
show install active
Step 4
router, and to compare to the active software report after installation operations
are complete.
You can also display the active packages for a specific node, and view
results in detailed or summary mode. See the Software Package
Management Commands on the Cisco ASR 9000 Series Router module
of Cisco ASR 9000 Series Aggregation Services Router System
Management Command Reference for more information.
Note
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
39
Upgrading and Managing Cisco IOS XR Software
Preparing for Software Installation Operations

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 9000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals