Cisco CRS Configuration Guide

vrf red
rd 1:1
address-family ipv4 unicast
maximum-paths eibgp 8
redistribute ospf 100
!
!
!
mpls ldp
log
adjacency
neighbor
!
router-id 1.1.1.11
address-family ipv4
!
interface POS0/2/0/1
address-family ipv4
!
!
vrf red
address-family ipv4
!
interface POS0/2/0/0
address-family ipv4
!
!
!
!
no interface POS0/2/0/0 shut
no interface POS0/2/0/1 shut
end
CSC-PE22 Configuration
hostname pe22
vrf red
address-family ipv4 unicast
import route-target
100:1
!
export route-target
100:1
!
!
!
interface Loopback0
ipv4 address 2.2.2.22 255.255.255.255
!
interface Loopback1
vrf red
ipv4 address 2.2.2.22 255.255.255.255
!
interface POS0/2/0/0
ipv4 address 122.1.0.22 255.255.255.0
!
interface POS0/2/0/1
vrf red
ipv4 address 193.169.1.22 255.255.255.0
!
interface POS0/2/0/2
ipv4 address 112.1.0.22 255.255.255.0
!
route-policy pass-all
pass
end-policy
!
router static
vrf red
address-family ipv4 unicast
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
96
Implementing MPLS Label Distribution Protocol
MPLS LDP CSC for Multiple VRFs Configuration: Examples

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs