ModificationRelease
Support was added for Unequal Load Balancing, IS-IS IP Fast
Reroute Loop-free Alternative routing functionality, and Path
Computation Element (PCE).
Release 3.5.0
No modification.Release 3.6.0
Support was added for the following features:
•
Ignore Intermediate System-to-Intermediate System (IS-IS)
overload bit setting in MPLS-TE.
•
MPLS-TE/Fast Reroute (FRR) over Virtual Local Area
Network (VLAN) interfaces.
Release 3.7.0
Support was added for the following features:
•
MPLS-TE Automatic Bandwidth.
•
SRLG (Shared Risk Link Groups).
•
Policy Based Tunnel Selection (PBTS) IPv6 that includes
the Interior Gateway Protocol (IGP) default path.
Release 3.8.0
The Point-to-Multipoint TE feature was added.Release 3.9.0
Support was added for the following features:
•
AutoTunnel Backup
•
SRLG (Shared Risk Link Groups)
Release 4.0.0
Support was added for the following features:
•
Ignore Intermediate System-to-Intermediate System
Overload Bit Setting in MPLS-TE
Release 4.1.0
The Auto-Tunnel Mesh feature was added.Release 4.1.1
Support was added for the following features:
•
Soft-Preemption
•
Path Option Attributes
Release 4.2.0
The Auto-Tunnel Attribute-set feature was added for auto-backup
tunnels.
Release 4.2.1
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
164
Implementing MPLS Traffic Engineering
To Next Page
Loading...
