EasyManuals Logo

Cisco CRS Configuration Guide

Cisco CRS
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #307 background imageLoading...
Page #307 background image
SUMMARY STEPS
1.
configure
2.
mpls traffic-eng
3.
auto-bw collect frequency minutes
4.
Use the commit or end command.
5.
show mpls traffic-eng tunnels [auto-bw]
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Enters MPLS-TE configuration mode.mpls traffic-eng
Example:
RP/0/RP0/CPU0:router(config)# mpls
Step 2
traffic-eng
RP/0/RP0/CPU0:router(config-mpls-te)#
Configures the automatic bandwidth collection frequency, and controls
the manner in which the bandwidth for a tunnel collects output rate
information; but does not adjust the tunnel bandwidth.
auto-bw collect frequency minutes
Example:
RP/0/RP0/CPU0:router(config-mpls-te)#
Step 3
minutes
auto-bw collect frequency 1
Configures the interval between automatic bandwidth adjustments
in minutes. Range is from 1 to 10080.
commit—Saves the configuration changes and remains within the
configuration session.
Use the commit or end command.
Step 4
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
289
Implementing MPLS Traffic Engineering
Configuring the Automatic Bandwidth

Table of Contents

Other manuals for Cisco CRS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CRS and is the answer not in the manual?

Cisco CRS Specifications

General IconGeneral
Operating SystemCisco IOS XR
Product TypeCore Router
Form FactorModular Chassis
DimensionsVaries by chassis type
WeightVaries by chassis type
ArchitectureDistributed
Switch FabricMulti-stage
Interface SupportEthernet, SONET/SDH, OTN
Interfaces/PortsVaries by line card
Port DensityVaries by line card
Routing ProtocolBGP, IS-IS, OSPF, MPLS
ManagementCLI, SNMP
Power SupplyRedundant, hot-swappable
CoolingRedundant, Hot-swappable Fan Trays
Supported ProtocolsIPv4, IPv6, MPLS
Management InterfacesEthernet, console
Security FeaturesACLs

Related product manuals