Cisco CRS Configuration Guide

interface POS0/4/0/1
!
!
mpls traffic-eng router-id Loopback 0
mpls traffic-eng area 51
!
rsvp
interface POS0/2/0/3
bandwidth 2000
!
!
interface tunnel-gte 1
ipv4 unnumbered Loopback 0
switching transit fsc encoding
sonetsdh
switching endpoint psc1 encoding packet
priority 3 3
signalled-bandwidth 500
destination 55.55.55.55
path-option 1 dynamic
!
mpls traffic-eng
interface POS0/2/0/3
flooding-igp ospf roswell area 51
switching key 1
encoding packet
capability psc1
!
switching link
encoding
sonetsdh
capability fsc
!
lmp data-link adjacency
neighbor gmpls5
remote te-link-id ipv4 10.0.0.5
remote interface-id unnum 12
remote switching-capability psc1
!
!
lmp neighbor gmpls5
ipcc routed
remote node-id 55.55.55.55
!
!
Tailend Router
router ospf roswell
router-id 55.55.55.55
nsf cisco
area 23
!
area 51
interface Loopback 0
!
interface MgmtEth0/0/CPU0/1
!
interface POS0/4/0/2
!
!
mpls traffic-eng router-id Loopback 0
mpls traffic-eng area 51
!
mpls traffic-eng
interface POS0/2/0/3
flooding-igp ospf roswell area 51
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
346
Implementing MPLS Traffic Engineering
Configure GMPLS: Example

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs