Cisco CRS

Removal of the GMPLS UNI submode results in the removal of all configuration within it, including any
other parser submode, and the immediate destruction of all GMPLS UNI tunnels.
Note
SUMMARY STEPS
1.
configure
2.
mpls traffic-eng
3.
gmpls optical-uni
4.
Use the commit or end command.
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Enters MPLS-TE configuration mode.mpls traffic-eng
Example:
RP/0/RP0/CPU0:router(config)# mpls
Step 2
traffic-eng
Enters GMPLS UNI configuration submode.gmpls optical-uni
Example:
RP/0/RP0/CPU0:router(config-mpls-te)#
Step 3
gmpls optical-uni
RP/0/RP0/CPU0:router(config-te-gmpls)#
commit—Saves the configuration changes and remains within the
configuration session.
Use the commit or end command.
Step 4
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
375
Implementing GMPLS UNI
Configuring TE for GMPLS UNI