Configuration with the web interface
98-150471-A02 Chapter 6: Configuration 6-33
6.3.6 Reports, syslog and SNMP traps
The antenna can send the following reports and messages:
• Diagnostics report
• Statistics report
• Remote syslog
• SNMP traps
Diagnostics report
You can send automatically generated diagnostic reports at fixed intervals. The diagnostic
report contains information from the ADU and ACU that are relevant for the service
personnel during troubleshooting. The report contains data for the selected download
intervals.
To set up sending a statistics report, do as follows:
1. Select SETTINGS > Reporting.
2. In the section DIAGNOSTICS REPORT enter the following:
•E-mail sender.
• E-mail recipients (comma separated).
•Send interval: Select e-mail disabled, day (default, 2-minute samples), week
(hourly samples) or month (hourly samples).
3. Click Apply.
You can generate and send the diagnostic report at any time by clicking Send now. You
can also download a diagnostics report directly to your computer, go to the page
HELPDESK and click Download. For more details see To download diagnostic and
statistics reports on page 8-2.
Statistics report
SAILOR 900 VSAT High Power can send a statistics report at fixed intervals. This report
contains historical information from the SAILOR 900 VSAT High Power of up to 1 month. It
is sent as a zipped attachment to an e-mail. The file format is a comma separated value file
(csv). The report can then be processed in spreadsheet applications, e.g. Microsoft Excel.
To set up sending a statistics report, do as follows:
1. Configure e-mail first, see E-mail setup on page 6-32.
2. Go to SETTINGS > Reports.
3. In the section STATISTICS REPORT enter the following:
•Email sender.
•Email recipients (comma separated).
• Send interval: Select disabled, day (default) with 2-minute samples, week with hourly
samples or month with hourly samples. The report contains statistics data for the
selected intervals.
4. Click Apply.
SAILOR900HP.book Page 33 Monday, July 18, 2016 12:44 PM