COBHAM SAILOR 900 - SNMP Support; Figure 6-41: Download of the MIB File

SNMP support
6-52 Chapter 6: Configuration 98-150471-A02
6.5 SNMP support
The SAILOR 900 VSAT High Power supports SNMP v2 requests to retrieve configuration
and present settings. SNMP is always enabled on all Ethernet interfaces. The SNMP
community string is public. The SAILOR 900 VSAT High Power offers via SNMP most of the
data that are available from the DASHBOARD web pages. Detailed documentation about
supported OIDs can be found in the SAILOR 900 VSAT High Power MIB file.
The MIB entries are grouped as shown below:
•System configuration
• Navigation coordinates
• Antenna pointing
• Dashboard and profile
• Tracking receiver
You can download the ACU MIB file directly from the ACU:
1. Go to the HELPDESK page.
2. Click the link Download MIB file.
3. Save the file on your computer.
You can also download the ACU MIB from Cobham eSupport web site.
You can set up SNMP traps, see Reports, syslog and SNMP traps on page 6-33.
Note
None of the SNMP values need to be polled more often than once a minute.
Polling SNMP values more frequently will impact the performance of the ACU.
Figure 6-41: Download of the MIB file
SAILOR900HP.book Page 52 Monday, July 18, 2016 12:44 PM