Configuration with the web interface
6-44 Chapter 6: Configuration 98-150471-A02
Require guest login: You must enter user name guest and password to enter the web
interface. Use user name guest and the password guest (default) or the user name
admin and the password 1234 (default).
3. Click Apply.
The settings to which access is denied are now greyed out for the non-administrator user.
To import and export a system configuration
If you need to reuse a configuration in another SAILOR 900 VSAT High Power system, you
can save the current configuration to a file, which can then be loaded into another SAILOR
900 VSAT High Power. You can also use this feature for backup purposes.
The configuration file contains all the settings you have entered during system setup:
satellite profiles, LAN setup, blocking zones, etc.
To save a configuration to a file, do as follows:
1. Select ADMINISTRATION > Export/import config.
2. Click the button Export. Follow the download instructions on the screen. You can use
this configuration file for upload into another SAILOR 900 VSAT High Power,
To load a configuration from a file, do as follows:
1. Select ADMINISTRATION > Export/import config.
2. Click the button Browse and locate the configuration file (.cfg file) you want to upload.
Then click the button Open.
3. In the web interface click the button Upload.
To clone a system configuration, do as follows:
1. Reset to factory default, see the following section for details.
2. Import a configuration from file, see section above.
Figure 6-37: Web interface: Administration, Export/import configuration
SAILOR900HP.book Page 44 Monday, July 18, 2016 12:44 PM
To Next Page
Loading...
