Configuration with the web interface
6-30 Chapter 6: Configuration 98-150471-A02
6.3.4 To configure the LAN network
You can enter a host name. The host name helps identifying the SAILOR 900 VSAT High
Power system when sending e-mail reports. The ACU has four 10/100 Mbit Ethernet ports
labelled LAN port 1, 2, 3 and 4. The ports are divided in three groups, each group operating
in its own network. You can setup DNS and Gateway.
To configure the LAN network go to SETTINGS > Network.
Figure 6-24: Web interface: SETTINGS, Network (default settings)
Make sure that the 3 networks do not use IP address ranges that overlap.
SAILOR900HP.book Page 30 Monday, July 18, 2016 12:44 PM
To Next Page
Loading...
