COBHAM SAILOR 900 - Table D-8: UCLI Command: Satellite

Supported commands
D-6 Appendix D: Command line interface 98-150471-A02
satellite rx_rf_freq
satellite rx_rf_freq
12.123456 9.75
Shows or sets the Rx frequency and LNB Lo
frequency.
•Ku band:
RF frequency: 10.7 – 12.75 GHz.
LNB Lo frequency: 9.6 GHz – 11.3 GHz.
The SAILOR VSAT system supports any LNB Lo.
•Ka band:
RF frequency: 19.2 – 20.2 GHz.
LNB Lo frequency: 18.25 GHz.
Note: Setting the Ku-band Rx frequency and LNB
Lo automatically configures the L-band rx
frequency:
Rx L-band freq = rx_rf_freq – LNB Lo
Example: 1567.890 MHz = 11.567890 GHz – 10
GHz
satellite rx_if_freq
satellite rx_if_freq
1200.123 9.75
Shows or sets the IF Rx frequency together with
the LNB Lo frequency.
•Ku band:
IF frequency within 950 MHz – 2150 MHz.
LNB Lo frequency within 9.6 GHz – 11.3 GHz.
The SAILOR VSAT system supports any LNB Lo.
•Ka band:
IF frequency within 950 MHz – 1950 MHz.
LNB Lo frequency: 18.25 GHz.
Note: Setting the L-band Rx frequency and LNB Lo
automatically configures the Ku-band Rx frequency:
Rx Ku-band frequency = LNB Lo + rx_if_frequency
Example: 11.567890 GHz = 10 GHz +
1567.890000 MHz
satellite tx_lo
Shows the current TX LO frequency, fixed at
Ku band:12.8 GHz
Ka band: 28.05 GHz
Command Description
Table D-8: UCLI command: satellite (Continued)
SAILOR900HP.book Page 6 Monday, July 18, 2016 12:44 PM