Keypad and menus of the ACU
98-150471-A02 Chapter 6: Configuration 6-51
6.4.4 Adjusting brightness of the display
To adjust the brightness do the following:
1. Press and hold OK for a short moment until BRIGHTNESS XXX% is displayed (XXX is the
current brightness value).
2. Hold OK pressed + press for lighter or for darker display.
3. Release OK to leave the brightness menu.
6.4.5 Power cycle of the ACU and ADU
To power cycle the ACU and ADU do as follows:
1. Press and hold and until the ACU display shuts down and the ACU reboots.
2. Wait until the system has rebooted and is operational again. The last active satellite
profile will be used.
SAILOR900HP.book Page 51 Monday, July 18, 2016 12:44 PM
To Next Page
Loading...
