COBHAM SAILOR 900 - Figure 6-22: Blocking Zone, Example: 315 - 45 Degrees; Figure 6-23: Blocking Zone, Example: 45

To Next Page

To Previous Page

Configuration with the web interface

98-150471-A02 Chapter 6: Configuration 6-29

Configuration

3. Azimuth: Enter start and stop azimuth value in degrees for the blocking zone. Values

allowed: 0 to 360 degrees. Enter clockwise.

4. Elevation: Enter the start and stop elevation angle for the blocking zone. If you enter

nothing, there will be no blocking zone. Values allowed: -30 to 90 degrees.

5. Select No TX for zones if you don’t want the system to transmit.

If not selected, the system also transmits when pointing through areas with blocking

objects. The VSAT modem will shut off for TX if no signal is received.

6. Click Apply to save the blocking zones.

Figure 6-22: Blocking zone, example: 315 - 45 degrees

Figure 6-23: Blocking zone, example: 45 - 315 degrees

Important

You must enter 2 different elevation angles to have an active blocking zone.

















$QWHQQD

%ORFNLQJ]RQH

