Installation check list: Antenna
7-2 Chapter 7: Installation check 98-150471-A02
8.
Make sure that the requirements
for mast foundation and height,
including flatness, gusset plates
and distance from welding
seams are met.
See ADU mast design: Foundation and
height on page 3-8.
9.
Make sure that the distances to
radar, Inmarsat systems, GPS
receivers and other transmitters
are as required.
See Interference on page 3-12.
10.
Make sure that the drain tube is
open and risk for water intrusion
is at a minimum.
See Other precautions on page 3-16.
11.
Check that the ADU is grounded
correctly, using the mounting
bolts.
See To ground the ADU on page 3-22
and
Grounding and RF protection on
page F-1.
Step Task Further information Done
Table 7-1: Installation check list: Antenna (Continued)
SAILOR900HP.book Page 2 Monday, July 18, 2016 12:44 PM
To Next Page
Loading...
