4.
Select Route Bar.
5.
Select Show Wide Route Bar If Possible. If Show
Wide Route Bar If Possible is on, the option is
highlighted in color.
Adjusting the Route View
The following settings are available for adjusting the
route view:
•
Display current street names: when this setting
is active, the name of the road the driver is
currently driving on appears on the route bar.
•
Route display style: set whether the route view
is displayed in 2D (in direction of travel) or 3D.
1.
Select ····Menu.
2.
Select Settings.
3.
Select Appearance.
4.
Select Guidance view.
5.
Select if the current street name should be dis-
played. If this setting is on, the radio button will
be highlighted in color.
6.
Select your guidance view style: 3D or 2D (in
direction of travel). The selected mode will be
highlighted in color.
Adjusting the Automatic Zoom
The following settings are available for Automatic
Zoom:
•
Zoom In To Next Turn. When this setting is ac-
tive, all turns and intersections on the route will
be zoomed in on along the route.
•
Based On Road Type. When this setting is ac-
tive, all turns and intersections on the route
may or may not be zoomed in on, depending
on the type of street.
•
None. When this setting is active, turns and
intersections are not zoomed in on.
1.
Select ····Menu.
2.
Select Settings.
3.
Select Appearance.
4.
Select Automatic Zoom.
5.
Select a zoom option. The active setting will be
highlighted in color.
Selecting a Voice for Spoken Messages
NOTE: If you choose a voice incompatible with
the units of measurement selected, the system
will ask you to verify your choice. In addition,
certain voices may be unable to read warnings
out loud, in which case the option to turn on that
feature will be disabled until you select a com-
patible voice.
The default short voice list includes the following
English and Spanish variations: New Zealand Eng-
lish, Irish English, Australian English, United States
English, British English, Spanish, and Mexican Span-
ish.
The system also includes voices speaking the
world’s major languages outside of English and
Spanish. They can be accessed by selected the All
Voices button in the bottom right of the Choose a
Voice screen.
1.
Select ····Menu.
2.
Select Settings.
3.
Select Voices.
4.
Select Choose a voice.
5.
Select a voice with the desired language and
accent; the active setting is indicated by a col-
ored dot.
Voice Instruction Settings
Two instruction settings are available under the
Voices menu: Read Arrival Time Out Loud and Read
Early Instructions Out Loud.
When Read Arrival Time Out Loud is active, the pro-
jected arrival time is read by the selected voice.
When Read Early Instructions Out Loud is active,
instructions to exit or turn are given in advance such
as "Ahead, turn left," and "After one mile take the
right exit."
1.
Select Settings.
2.
Select Voices.
3.
Select Choose a voice.
4.
Select if you would like either or both of the
vocal instruction settings turned on; an active
setting is indicated by a radio switch highlighted
in color.
Driver Assistance Features
7.4
To Next Page
Loading...