Pull the cable handle labeled ACCESS forward to
open the sleeper door. The secondary method is the
black knob located at the upper rear edge of the
sleeper door opening. Pull this knob down to open
the sleeper door.
IMPORTANT: The sleeper access doors have
two-stage latching. When closing the doors, en-
sure that they are completely latched to prevent
wind noise and water intrusion.
Sliding Side Window
The lower section of the sliding side window moves
vertically and may be locked in multiple positions to
suit. Two spring-loaded tabs are located at the top of
the sliding section. To adjust the window, pull both
tabs toward the center of the glass and move the
sliding section to the desired height. Release the
tabs to lock the sliding section.
f61145011/15/2019
1
2
3
4
1. Inverter/Charger
Display Panel
2. Sleeper Climate
Control Panel
3. Power Outlet
4. Clock
Fig. 10.6, Sleeper Control Panel
Cab and Sleeper Features
10.5
To Next Page
Loading...