6.
When a device is found, the name of that device
will appear on the screen in addition to the mes-
sage My Device Was Not Found. Select the de-
vice name.
7.
A pop-up will appear asking for verification of a
passkey on the phone. Verify the passkey. The
device is authorized and connected.
NOTE: The phone will automatically reconnect
to the system when in range until deauthorized
either in the ICC5 infotainment system or on the
phone itself.
The Phone Menu
Once a phone is authorized and connected, a mobile
phone menu for that phone is available.
In addition, the call list and contacts of the primary
phone are loaded and accessible.
The phone menu provides a search function for the
primary phone’s contacts, a number pad for calling
people not in the contact list, and access to Blu-
etooth and phone specific settings.
Connecting a Second Phone
Connecting a second phone follows the same pro-
cess as connecting the initial phone, however the call
list and contacts of the second phone are not loaded.
1.
Open the Device Manager.
2.
Select Connect Device.
3.
Select Connect New Device. The vehicle
searches for the device.
4.
When a device is found, the name of that device
will appear on the screen in addition to the mes-
sage My Device Was Not Found. Select the de-
vice name.
5.
A pop up will appear asking for verification of a
passkey on the phone. Verify the passkey. The
device is authorized and connected.
NOTE: The phone will now automatically recon-
nect to the system when in range until deautho-
rized either in the ICC5 infotainment system or
on the phone itself.
Two Phone Mode
In two phone mode, the primary mobile phone can
access the phone’s contact and call list on the info-
tainment system and make outgoing calls and re-
ceive incoming calls; the secondary mobile phone
can receive incoming calls.
Switching Primary and Secondary
Phones
NOTE: When the secondary phone becomes
the primary phone, that phone’s contacts and
call list are loaded into the system. The previous
primary phone, now the secondary phone, has
no data accessible on the system.
1.
Open the Phone menu.
2.
Select the icon showing two phones. The primary
and secondary phone are switched.
Changing Phone Specific Settings
NOTE: You can only change phone functions on
the primary mobile phone.
1.
Open the Phone menu. The primary active
phone’s name should display in the upper left.
2.
Select the gear icon to access the setting for the
phone. The Options screen appears.
3.
Choose which of the following options to change:
•
Synchronize Contacts Automatically
•
Synchronize contacts: this options is only
available if Synchronize Contacts Automati-
cally is turned off.
•
Delete Contacts: deletes all contacts down-
loaded from the active phone. Only avail-
able if Synchronize Contacts Automatically
is turned off.
•
Delete Call List: deletes the call list down-
loaded from the active phone.
•
Name Format: names may be displayed as
Last, First; Last First; or First Last.
•
Bluetooth: Access Device Manager to con-
nect a new phone, deauthorize a phone,
and control a phone’s transmission and
reception volume.
Disconnecting a Phone
A phone may disconnect from the system for the fol-
lowing reasons:
•
It moves out of range
•
It is shut off or otherwise loses power
Instruments
3.43
To Next Page
Loading...